Toyota Corolla

1992-1998 of release

Repair and operation of the car



Toyota Corolla
- 1. Maintenance instruction
   1.2. Codes of models
   1.3. Control panel
   + 1.4. Combination of devices
   - 1.5. Governing bodies and instrumentations
      1.5.1. Keys for the car
      1.5.2. System of an immobilizer (recognition of a code of start-up of the engine)
      1.5.3. Locking of doors
      1.5.4. Electric equipment of doors
      1.5.5. Drive of glasses
      1.5.6. Trunk lid
      1.5.7. Back door
      1.5.8. Cowl
      1.5.9. Stopper of a jellied mouth of a fuel tank
      1.5.10. The hatch with the electric drive
      1.5.11. Adjustment of forward seats
      1.5.12. Addition of a back seat
      1.5.13. Head restraint
      1.5.14. Seat heater
      1.5.15. Safety cushions for the driver and the passenger
      1.5.16. Elements of system of additional damping at accident
      1.5.17. Adjustment of an inclination of a steering wheel
      1.5.18. Rear-view mirror
      1.5.19. Headlights and indexes of turns
      1.5.20. Adjustment of a beam of light of headlights
      1.5.21. Signal of an emergency stop and regulator of illumination of devices
      1.5.22. Back fog lamps
      1.5.23. Lamps of internal lighting
      1.5.24. Inclusion of a cleaner and washer of a windshield
      1.5.25. Inclusion of a cleaner and washer of back glass
      1.5.26. Heater of back glass
      1.5.27. Index of level of fuel
      1.5.28. Index of temperature of cooling liquid
      1.5.29. Voltmeter
      1.5.30. Tachometer
      1.5.31. The counter of the total passable way
      1.5.32. Light indexes and the warning signals
      1.5.33. Lock of ignition and lock of a steering column
      1.5.34. 3-staged automatic transmission
      1.5.35. 4-staged automatic transmission
      1.5.36. Mechanical transmission
      1.5.37. System of blocking of interaxal differential
      1.5.38. Emergency brake
      1.5.39. The AM-UKV radio receiver with electronic control
      1.5.40. The AM-VHF-radio tape recorder with electronic control
      1.5.41. Adjustment of the direction of a stream of air
      1.5.42. Hours
      1.5.43. Lighter and ashtray
      1.5.44. Glove box
      1.5.45. The container for trifles
      1.5.46. A framework for transportation of baggage (a body the Versatile person)
      1.5.47. Trunk lid
      1.5.48. Laid on rug of a floor
      1.5.49. Car running in period
      1.5.50. Fuel
      1.5.51. Threefold catalytic converter
      1.5.52. Oil expenditure engine
      1.5.53. Brakes
      1.5.54. Rules of placement of freight in a luggage carrier
      1.5.55. Identification data of the car
   + 1.6. Start-up of the engine and driving
   1.7. Specifications
   1.8. Adjusting data, filling capacities and liquids
   + 1.9. Possible malfunctions
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment


1.5.36. Mechanical transmission

GENERAL INFORMATION

The scheme of gear shifting standard, is shown on an illustration.

At inclusion of transfer press a coupling pedal, then smoothly release.

It is not allowed to hold a foot on a coupling pedal during the movement, otherwise violation of normal work of coupling is possible. Is also inadmissible to put the car on transfer to hold on rise, for this purpose use the emergency brake.

Too early switching on an overgear and too late switching on the lowered leads to an overload of the engine and emergence of knocks. Frequent gear shifting at maximum permissible speeds of the movement is the reason of the accelerated wear of the engine and the increased fuel consumption.

Maximum permissible speeds of the movement

The movement of the car with speed limit on this transfer can be necessary for departure on the highway or for overtaking of slowly moving transport.

Surely observe the next speed limits of the movement.

For engines of models 2E and 4E-FE

transfer
speed (km/h)
The 1st
44
The 2nd
82
The 3rd
119
The 4th
161

For model 4A-FE engines

transfer
speed (km/h)
The 1st
52
The 2nd
86
The 3rd
125
The 4th
169

For model 7A-FE engines

transfer
speed (km/h)
The 1st
45
The 2nd
78
The 3rd
120
The 4th
165

For model 2C engines

transfer
speed (km/h)
The 1st
40
The 2nd
69
The 3rd
107
The 4th
165

Prevention

Switching on a low gear if the speed of the movement exceeds speed limit for the following low gear is not allowed.


Councils for driving

If inclusion of a backing from neutral position of the lever difficult, for a moment release a pedal of coupling and repeat inclusion.

Do not include the 5th transfer when towing the trailer to avoid increase in a brake way of the car against norm.