Toyota Corolla

1992-1998 of release

Repair and operation of the car



Toyota Corolla
- 1. Maintenance instruction
   1.2. Codes of models
   1.3. Control panel
   + 1.4. Combination of devices
   - 1.5. Governing bodies and instrumentations
      1.5.1. Keys for the car
      1.5.2. System of an immobilizer (recognition of a code of start-up of the engine)
      1.5.3. Locking of doors
      1.5.4. Electric equipment of doors
      1.5.5. Drive of glasses
      1.5.6. Trunk lid
      1.5.7. Back door
      1.5.8. Cowl
      1.5.9. Stopper of a jellied mouth of a fuel tank
      1.5.10. The hatch with the electric drive
      1.5.11. Adjustment of forward seats
      1.5.12. Addition of a back seat
      1.5.13. Head restraint
      1.5.14. Seat heater
      1.5.15. Safety cushions for the driver and the passenger
      1.5.16. Elements of system of additional damping at accident
      1.5.17. Adjustment of an inclination of a steering wheel
      1.5.18. Rear-view mirror
      1.5.19. Headlights and indexes of turns
      1.5.20. Adjustment of a beam of light of headlights
      1.5.21. Signal of an emergency stop and regulator of illumination of devices
      1.5.22. Back fog lamps
      1.5.23. Lamps of internal lighting
      1.5.24. Inclusion of a cleaner and washer of a windshield
      1.5.25. Inclusion of a cleaner and washer of back glass
      1.5.26. Heater of back glass
      1.5.27. Index of level of fuel
      1.5.28. Index of temperature of cooling liquid
      1.5.29. Voltmeter
      1.5.30. Tachometer
      1.5.31. The counter of the total passable way
      1.5.32. Light indexes and the warning signals
      1.5.33. Lock of ignition and lock of a steering column
      1.5.34. 3-staged automatic transmission
      1.5.35. 4-staged automatic transmission
      1.5.36. Mechanical transmission
      1.5.37. System of blocking of interaxal differential
      1.5.38. Emergency brake
      1.5.39. The AM-UKV radio receiver with electronic control
      1.5.40. The AM-VHF-radio tape recorder with electronic control
      1.5.41. Adjustment of the direction of a stream of air
      1.5.42. Hours
      1.5.43. Lighter and ashtray
      1.5.44. Glove box
      1.5.45. The container for trifles
      1.5.46. A framework for transportation of baggage (a body the Versatile person)
      1.5.47. Trunk lid
      1.5.48. Laid on rug of a floor
      1.5.49. Car running in period
      1.5.50. Fuel
      1.5.51. Threefold catalytic converter
      1.5.52. Oil expenditure engine
      1.5.53. Brakes
      1.5.54. Rules of placement of freight in a luggage carrier
      1.5.55. Identification data of the car
   + 1.6. Start-up of the engine and driving
   1.7. Specifications
   1.8. Adjusting data, filling capacities and liquids
   + 1.9. Possible malfunctions
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment


1.5.12. Addition of a back seat

GENERAL INFORMATION

Unblock a back of a seat and incline. If seat head restraints are provided before putting a seat, remove head restraints.

When folding a back of a back seat the internal space of a luggage compartment increases (a loading order see in subsection 1.5.54).

If necessary it is possible to put backs separately.


Prevention

At recovery of the provision of a back of a back seat be convinced of lack of twisting of seat belts, and also that belts are not clamped by a back and them it is possible to use at any time.

Be convinced of reliability of fastening of a back, having shaken it, having undertaken the top part.


Addition of a back seat (except a body a sedan)

For 3-door and 5-door hatchbacks

 

For a body versatile person


Before putting a back clean seat belts of a back seat.

When folding a back be convinced that the belt passes through the directing bracket, otherwise damage of a belt is possible.

At an otkidyvaniye of a back be convinced that the belt is not clamped between a seat and a back.

Prevention

When using of a belt get a belt from the directing bracket.


Having taken by the edge tapes, cast away a seat pillow forward. The lower forward part of a pillow is strengthened on hinges therefore it should be turned simply.

Prevention

Be convinced that seat belts are not overwound or not clamped under a pillow of a seat and are in working order.

Be convinced of reliability of fastening of a pillow, trying to raise it for edge about a lifting tape.


Unblock a back of a seat and lower a back, having at the same time given a seat pillow forward. Before folding of a back of a back seat remove head restraints (if are provided).
After lowering of a back hook on a tape buckle for a ledge from a reverse side of a back.