Toyota Corolla

1992-1998 of release

Repair and operation of the car


Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
- 11. Body
   11.1. Maintenance and repair
   11.2. Vinyl finishing
   11.3. Upholstery and rugs
   11.4. Repair of insignificant damages of a body
   11.5. Repair of considerable damages of a body
   11.6. Loops and locks
   11.7. Windshield and motionless glasses
   11.8. Cowl
   11.9. Trunk lid
   11.10. A back door (models with a body "Station wagon")
   11.11. Basic rack of a back door
   11.12. Decorative panel of a door
   11.13. Door
   11.14. Door latch, cylinder of the lock and handle
   11.15. Door windowpane
   11.16. Bumpers
   11.17. External mirror
   11.18. Seats
   11.19. Frame of a combination of devices
   11.20. Glove compartment
   11.21. Central decorative panel
   11.22. Casing of a steering column
   11.23. Lower panel of finishing of a steering column
   11.24. Console
   11.25. Dashboard
   11.26. Front grille
   11.27. Ventilating grate of a cowl
   11.28. Seat belts
+ 12. Electric equipment


11.18. Seats
GENERAL INFORMATION

SITTING LOBBIES

Typical parts of a forward seat

1. Head restraint
2. Head restraint support
3. Seat back pillow
4. Seat back cover
5. Sitting pillow cover
6. Seat pillow
7. The bent ring
8. Seat pillow frame
9. Internal guard
 10. Internal zone seat belt
11. Internal adjusting adaptation
12. External adjusting adaptation
13. Handle of seat height adjustment
14. External guard
15. Seat otkidyvaniye handle

Removal and installation
PERFORMANCE ORDER
1. Unscrew fixing bolts, disconnect all electric connections and remove seats from the car.
2. Installation is made in the return sequence.

BACK SITTING

Typical parts of a back seat


Removal and installation
PERFORMANCE ORDER
1. On cars with a body like "Sedan" raise forward part of a pillow up, and then pull out it, having pulled towards forward part of the car. Unscrew fixing bolts of a back of a seat, and then raise it behind to unfasten a seat back from a body.
2. On cars with a body like "Station wagon" unscrew fixing bolts on the basis of a seat pillow, pull back part of a pillow up and remove it from the car. Unscrew fixing bolts of the hinge of a back of a seat and remove a seat back from the car.
3. Installation is made in the return sequence.