| 1. Disconnect the battery from weight (see subsection 3.3.2). |
| 2. Remove the lower facing panel under a glove box from the passenger (see subsection 11.23). |
| 3. Remove the central panel from the passenger (see subsection 11.21). |
|
4. Disconnect sockets from the electronic control unit, previously having disunited locks of sockets (are specified by shooters). |
| 5. Turn off bolts from arms of fastening of the control unit. |
| 6. Remove the electronic control unit from the car. |
| 7. Installation of the block is carried out upside-down. |