Toyota Corolla

1992-1998 of release

Repair and operation of the car



Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
- 5. Fuel, exhaust systems
   5.1. Specifications
   5.2. Order of performance of a decompression of fuel system
   5.3. Fuel pump and pressure of fuel
   5.4. Removal and installation of the fuel pump
   5.5. Fuel level sensor
   5.6. Fuel pipes and joints
   5.7. Fuel tank
   5.8. Cleaning and repair of a fuel tank
   5.9. Air filter
   5.10. Cable of the drive of a butterfly valve
   5.11. System of electronic injection of fuel (EFI - system)
   5.12. Check and replacement of EFI units - systems
   5.13. Service of an exhaust system
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment


мебельный щит бук сращенный купить, fm.

5.10. Cable of the drive of a butterfly valve

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Release cable tip lock-nuts on the case of a butterfly valve.
3. Turn the lever of a butterfly valve and get a cable, having passed it through a groove in the lever.
4. Disconnect a cable (it is specified by an arrow) from a pedal. Turn off two bolts of fastening of an arm of a cover of a cable to a partition of a motor compartment.
5. Working from within salon, stretch a cable through a partition of a motor compartment.

Installation and adjustment

PERFORMANCE ORDER
1. The cable is established upside-down. Be convinced of correctness of installation of a through sealant of a cover of a cable in a partition of a motor compartment.
2. For adjustment of a cable press to the full a pedal, thus the butterfly valve has to be completely open. If the gate did not open completely, release lock-nuts, press a pedal to the full and at completely open gate tighten lock-nuts.
3. Check adjustment. At a pedal otpuskaniye the gate has to be closed completely.